Operating - Vicks MiniFilterFree VUL520 Serie Manuel D'utilisation Et D'entretien

Filling/Refilling
NOTE: Tank should be carried using two hands. One hand using carrying handle located on tank top
and other hand supporting the base of the tank.
Kaz will not accept responsibility for property damage caused by water spillage.
Step 1
1.
Remove Tank and turn upside down.
2.
Remove Tank Cap in the direction of the open lock sign to remove cap.
3.
Fill Tank with cool water. Do not fill with warm or hot water.
4.
Securely replace Tank Cap, aligning arrow to lock symbol.
5.
Place Tank back on Base
CAUTION: USE CARE WHEN HANDLING WATER TANK TO AVOID UNNECESSARY
IMPACT. BANGING OR DROPPING THE WATER TANK COULD RESULT IN DAMAGE
TO THE TANK THAT WILL CAUSE LEAKING.

Operating

Step 1
1.
Power: With the Power Knob in the off position, plug humidifier into a polarized 120V
CAUTION: TO AVOID ELECTRIC SHOCK DO NOT PLUG HUMIDIFIER INTO
outlet.
OUTLET WITH WET HANDS.
2.
Output: Turn the Power Knob to highest setting.
3.
Humidity Level: When a comfortable humidity level is reached turn Power Knob
to a lower setting. A comfortable humidity level is between 40-60%.
To monitor your humidity level use a humidity monitor such as the Vicks V70 or
V70-CAN model.
If you notice condensation on the walls, windows or around unit, your humidity level is too high.
Turn humidifier off.
4.
Direct mist output away from walls, furniture and bedding.
CAUTION: BEFORE MOVING HUMIDIFIER, TURN OFF, UNPLUG AND EMPTY THE
HUMIDIFIER.
Step 2 Step 3
Step 2
Step 4
Step 3
4
Step 5
Step 4
5