S&P CB-2005N Mode D'emploi page 20

NB: The heater incorporates a turn-off delay of 30 seconds to cool the device. Do not turn
off the device with the master switch (ON / OFF), or by unplugging it directly from the mains.
3.6. Detection of OPEN WINDOW
To avoid the heater working with the window open, the heater incorporates an energy saving
control function. This function can only be activated when the heater is working in MANUAL
mode.
• Press to activate this function. On the screen the corresponding (
to indicate that we have this control function activated.
• If the room temperature falls 5ºC in 10 minutes, the heater detects that we have a window
/ door open and the heater will stop working for 60 minutes. On screen the open window
icon will fl ash to inform us that this function is active. If after the 60 minutes the tempe-
rature still hasn't risen at least 1ºC, the heater will stay off for another 60 minutes, as it
understands that the window / door is still open. If the room temperature has increased
one degree with respect to the temperature at the time of the stop, the heater will keep
working in MANUAL MODE.
3.7. Programming AUTOMATIC operation:
• Before starting to program automatic operation and to obtain greater energy / fi nancial
savings without losing comfort, you need to know what your normal times are.
20
:
• To start programming automatic operation you must be in
standby mode. To make sure you are in standby mode, press
successively until there is no operating power selected.
As shown on the corresponding screen.
• Next press the
the automatic operating mode. The alarm clock icon and the
fi rst day of the week (Monday /1) will appear fl ashing on the
screen.
• By pressing ( /
to program. Confi rm with the (OK) key. Next, enter at what
hour / minutes (
tically turn on. Confi rm with the (OK) key.
key for 3 seconds to start programming
) select the day of the week you want
/ ) you want the heater to automa-
) icon will appear,