Fuse Or Earth Fault Breaker Trip Frequently; The Machine Cannot Cope - Husqvarna HTC T6 Manuel De L'opérateur

HTC DURATIQ

9.3 Fuse or earth fault breaker trip frequently

Fault description
Earth fault breaker trips.
Fuse trips.

9.4 The machine cannot cope

Fault description
The machine cannot cope
58
Cause
EMC filter, cabling or
converter
Too high a load or too small
fuses
Cause
Too high a load
Troubleshooting
Instruction user
Too high a leakage
current/earth fault.
Check size of fuses and
inertia.
Reduce the machine's load
by reducing the grinding
pressure, lower the revs per
minute or by changing tool.
See the machine's power
meter.
Instruction user
Reduce the grinding
pressure.
If the machine runs at high
speed, lower the revs per
minute so the machine
becomes stronger. See
meter for available power.
Voltage drop, check the
voltage meter during
grinding.
Too sticky a coating on the
surface being processed.
Run half of the machine on
the surface to be cleaned
and half on the clean
surface. This removes any
residue from the tools.
Check the tools. Ensure that
the correct tools are used,
that they are in working order
and that they are correctly
fitted.
D002998, 02.00