Information About The Machine; Unpacking The Equipment; Transport; Lifting - Husqvarna HTC T6 Manuel De L'opérateur

HTC DURATIQ

3 Information about the machine

3.1 Unpacking the equipment

Check the packaging and equipment carefully on delivery for any possible transport damage.
If there is any sign of damage, contact the retailer and report the damage. Report packaging
damage to the transport company as well.
Check that the delivery matches the order. If there are any questions, contact the retailer.

3.2 Transport

3.2.1 Transport
Always make sure that the machine is securely anchored to its surroundings and that the
grinding head is lowered on to the surface. Tighten the securing straps, or other equipment
used for anchoring during transport over non-moving parts, e.g. the machine's chassis.

3.2.2 Lifting

The machine can also be lifted using the lifting eyes provided or using other approved lifting
equipment. In which case, make sure that the weights are locked in the forward position and
that the handle is in its back position, see Handling weights page
page 31. When lifting the machine, lifting straps must be used.

3.2.3 Movement

When moving on sloping surfaces, e.g. loading ramps, the machine should be secured in the
lifting eyes, for example, using a winch. This is a safety measure in case the machine starts
to roll out of control or tip over. The weights should be in position 1, see Handling weights
page 33. Otherwise, there is a risk that the machine tips backwards. Ensure there is no
one below the machine during movement on sloping surfaces.
D002998, 02.00
WARNING
Risk for personal injury and mechanical damage
NOTE
During moving, transport and lifting, the weights shall be in
position 1, see Handling Weights.
Information about the machine
33 and Handle setting
13