Attachment To Back D-Ring - Sperian Miller Twin Turbo Manuel D'utilisation

Step 7
(a) Align PFL Spacer and TurboLite Swivel
Loop and push PFL Retainer Pin until head
contacts Outer Frame.
(b) Slide Outer Frame to center position to
engage PFL Retainer Pin.
Outer
B.
Frame

5.0 Attachment to Back D-ring

WARNING:
This device must only be worn on the back D-ring and is not compatible with
web-loop back D-rings.
Step 1
Rotate D-Ring Pin Retainer Clockwise
to the fully open position.
Us er Ins tru ct ion s - Engl is h
PFL
Retainer Pin
A.
D-Ring Pin
Retainer
To install the other TurboLite Unit, repeat steps
5-7, sliding Outer Frame in the opposite direction.
Reverse Steps 1-3 to secure D-Ring Pin
and D-Ring Pin Retainer.
Install Slide Lock bolt with a 5/32" Hex wrench
and tighten to approx 10 ft-lbs. (reverse of Step 4)
Rotate D-Ring Pin Knob Counter-Clockwise
until D-Ring Pin is free to move.
8
Step 8
Outer
Frame
Slide Lock Bolt
Step 9
Step 10
Step 2
D-Ring Pin Knob