Purpose; General Requirements; General Warnings / 2.2 Warnings And Limitations 3.0 System Compatibility - Sperian Miller Twin Turbo Manuel D'utilisation

Thank You
Thank you for your purchase of Miller Fall Protection equipment. Miller brand products are
produced to meet the highest standards of quality at our ISO 9001 certified facility. Miller Fall
Protection equipment will provide you with years of use, if cared for properly.
WARNING
All persons using this equipment must read, understand and follow all instructions.
Failure to do so may result in serious injury or death. Do not use this equipment un-
less you are properly trained.
Questions?
It is crucial that the authorized person/user of this fall protection equipment read and under-
stand these instructions. In addition, it is the employer's responsibility to ensure that all users
are trained in the proper use, inspection, and maintenance of fall protection equipment. Fall
protection training should be an integral part of a comprehensive safety program.
Proper use of fall arrest systems can save lives and reduce the potential of serious injuries
from a fall. The user must be aware that forces experienced during the arrest of a fall or pro-
longed suspension may cause bodily injury. Consult a physician if there is any question about
the user's ability to use this product. Pregnant women and minors must not use this product.

1.0 Purpose

Miller Self-Retracting Lifelines, including Fall Limiters and Retractable Web Lanyards, are
self-contained retractable devices designed to be used by personnel in applications where fall
protection in combination with unrestricted worker mobility is needed.

2.0 General Requirements

2.1 General Warnings
All warnings and instructions shall be
provided to authorized persons/users.
All authorized persons/users must
reference the regulations governing
occupational safety, as well as applicable
ANSI or CSA standards. Please refer
to product labeling for information on
specific OSHA regulations, and ANSI and
CSA standards met by product.
Proper precautions should always be taken
to remove any obstructions, debris, material,
or other recognized hazards from the work
area that could cause injuries or interfere
with the operation of the system.
All equipment must be inspected before
each use according to the manufacturer's
Us er Ins tru ct ion s - Engl is h
CALL
1.800.873.5242
3
instructions.
All equipment should be inspected by a
qualified person on a regular basis.
To minimize the potential for accidental
disengagement, a competent person must
ensure system compatibility.
Equipment must not be altered in any
way.Repairs must be performed only by
the manufacturer, or persons or entities
authorized in writing by the manufacturer.
Any product exhibiting deformities, unusual
wear, or deterioration must be immediately
discarded.
Any equipment subject to a fall must be
removed from service.