Faber CRISTAL SS Instructions D'installation page 4

Pre-Planning Your Installation - Important: The recommended height to install this hood
off the cooktop is a minimum of 24" and a maximum of 30" for maximum effectiveness. Also
consult the cooktop manufacturer's recommendation. NOTE: If direct rear venting, use the side
dimensional diagram below on the right. For top venting (comes standard in this position),
use the left dimensional diagram. Refer to page 5 for directions for direct rear venting.
CRISTAL SIDE DIMENSIONS
(TOP VENT - STANDARD)
3 15/16"
The Cristal comes with a stainless steel front strip installed. Optional black and white kits are available for purchase. For
a custom front strip, a local cabinet shop can make a strip to match your cabinets.
CRISTAL DIMENSIONS
3 15/16"
FRONT TRIM OPTIONS
CUSTOM FRONT TRIM DIMENSIONS
29 7/8" or 35 7/8"
CUT-OUT
CRISTAL SIDE DIMENSIONS
(DIRECT REAR VENT OPTION)
1 15/32"
3/4"
Version 06/14 - Page 4