External Unit - Niko 10-001-01 Mode D'emploi

10-001-01
DESCRIPTION
The kit 10-001-01 is an audio kit and is part of the Access Control Standard range. The kit consists of an
external unit (door telephone) with one bell push button, an internal unit and a power supply module. The
microphone and loudspeaker of the external unit are adjustable. The external unit is provided with a text field
for personalization.

EXTERNAL UNIT

Removing the nameplate on the front of the external unit
Insert the key into the opening provided on the front side and press gently.
Push the nameplate up to remove it. Slide down the nameplate so the
connection terminals become visible (fig.1).
Namecards for personalization
You can fill out the provided blank namecards and insert them behind the
white plastic foil of the nameplate.
Adjusting the volume at the external unit
The volume of the microphone (volume on internal unit) and the loudspeaker (volume on external unit) can be
adjusted using the potentiometers on the printed board of the external unit. Turn clockwise to decrease the
volume, turn counterclockwise to increase the volume.
Position
EN
Function
potentiometer for loudspeaker (volume on external unit)
potentiometer for microphone (volume on internal unit)
1
3
2
fig.1
11