Scope Of Supply; Device Description - Weller WMRP Mode D'emploi

6-12
PK Elektronik Vertriebs GmbH, E-Mail: info@pkelektronik.com, Internet: www.pkelektronik.com

3 Scope of supply

WMRP:
− WMRP soldering pencil,
− WDH 50 safety rest with
stop + go function for WMRP
− RT 3 soldering tip 40 W,
− Operating instructions
− Safety booklet
WMRT:
− WMRT micro desoldering tweezers, T005 13 174 99
− WMRTH safty rest with
stop + go function for WMRT,
− RTW 2 Tip Set 0,7 x 0,4 mm, 45°,
− Operating instructions
− Safety booklet

4 Device description

4.1 WMRP soldering pencil
The WMRP soldering pencil is a extremely powerful 40 W fine
soldering iron with the heating system integrated into the soldering
tip. Due to a plug-in system, the soldering tip can be changed
without tools. The soldering tip temperature is reached rapidly and
controlled precisely. Thanks to a sensor installed in the handle, the
soldering iron is shut off automatically when it is placed in the
WDH 50 holder.
Note The Weller WMRP soldering pencil may only be used with WD 1M
or WD 2M series power units.
4.2 WMRT micro desoldering tweezers
Weller WMRT micro desoldering tweezers are designed for
reworking and repairing precision SMT electronic devices. The
soldering/desoldering tip set can be quickly and easily changed
without the use of tools. The tips are pre-aligned and additional
alignment is not required. The integrated (2 x 40 W) heating
elements ensure that the soldering/desoldering tip temperature is
reached very quickly and controlled precisely. The desoldering
tweezers are switched off automatically when placed in the WMRTH
tool holder.
Note The Weller WMRT micro desoldering tweezers may only be used
with WD 1M or WD 2M series power units.
WMRP/WMRT
T005 29 171 99
T005 15 156 99
T005 44 603 99
T005 15 146 99
T005 44 652 99