Bausch Proxima ISDN Lite Manuel D'utilisation page 92

Hex Decimal
62 98
63 99
64 100
65 101
66 102
6F 111
7F 127
91 145
A2 162
FF 255
Examples of extended messages.
We start from a Proxima ISDN Lite which has the following settings:
•
protocol 6 is for voice (S111 is 1).
•
Protocol 11 is for PAD (S111 is 7).
•
S112=35 (maximum information and automatic PAD VC).
The messages sent by the Proxima ISDN Lite are printed in italics:
AT&O6*D/11
OK:6,0,6
PROGRESS:6,0,0,6,1
ALERT:6,0,6,1
CONNECTED:6,,0,6,1
CLEARED:6,10
AT*D/69855044*5/"Hello"
OK:6,0,6
CONNECTED:6,"Welcome",0,1,2
AT*H0/6
Description
message not compatible with call state or message type non-existent or not
implemented
information element non-existent or not implemented
invalid information element contents
message not compatible with call state
recovery on timer expired
protocol error, unspecified
interworking, unspecified
no signaling data link establishment
no line activation
call clearing, unspecified
Select protocol 6, dial ISDN number 11.
Direct response that call number 6 on ISDN access number 0
is being established using protocol 6.
Message for call no. 6 using protocol 6, channel B1,
communication with analog network.
The device called is ringing:
ALERT message.
First call (6) has been established, channel B1 has been
selected.
Call (6) has been broken off by normal cause (10).
While the first connection is being established, a second
command follows to dial ISDN number 69855044,
subaddress 5 and User Information "Hello".
Note that it isn't necessary to give the &O6 command as this
protocol is already active.
Direct response that call number 6 on ISDN access number 0
is being established using protocol 6.
Second call (6) has been established. Channel B2 has been
selected. The recipient responded with "Welcome"
Break off call no. 6
92