Blower Assembly; Assembling Blower - Remington Rm180B Guide Du Propriétaire

BLOWER ASSEMBLY

Assembling Blower

WA R N I N G : To R e -
duce The Risk of Per-
sonal Injury or Electric
Shock – Disconnect from
power source before as-
sembling or changing at-
tachments.
Follow the steps below to assemble
the blower.
1. Slide the blower tube competely
onto outlet on front of blower
housing with the curved end of
the blower tube facing up. (See
Figure 1)
2. Fasten with the two mounting
screws. (See Figure 2)
FPO
Figure 1 - Sliding blower tube into place
Figure 2- Fasten with mounting screws.
7