Epson PM-400 Guide Rapide page 12

Replacing the Ink Cartridge
Make sure you have a new ink cartridge before you begin. You must install the new
cartridge immediately after removing the old one.
Caution: Do not open the ink cartridge package until you are ready to install the ink.
Cartridges are vacuum packed to maintain reliability.
Note: Leave the expended cartridge installed until you have obtained a replacement, or
the ink remaining in the print head nozzles may dry out. If you remove a low or
expended ink cartridge, you cannot reinstall and use the cartridge.
1. Turn on your product.
2. If an ink cartridge is expended, you see a message on the LCD screen. Press the
button.
If you're replacing a cartridge before you see a message on the LCD screen, press
necessary, then select
the button to proceed.
OK
3. Unpack the ink cartridge and completely remove the yellow tape only.
Caution: Do not remove any other labels or seals, or ink may leak.
12
Replacing the Ink Cartridge
Setup > Maintenance > Ink Cartridge Replacement
OK
if
. Press