Operating Your Appliances; Internal Light - Zephyr Preserv PRB24C01BG Guide D'utilisation, D'entretien Et D'installation

Operating Your Appliance
If the unit is unplugged, power lost, or turned off, you must wait 3 to 5 minutes before
restarting the unit. If you attempt to restart before this time delay, the appliance may
not start and will keep the last set temperature.
USING YOUR CONTROL PANEL:
This beverage cooler has a temperature range from
Power Button
Press and hold this button for three seconds to power your unit on or off. While
the unit is on the R 'Compressor Running' light may illuminate to indicate the internal
compressor is active.
Increase Temperature
Press this button to increase the temperature by one (1) degree increments. 50ºF is
the highest available temperature on this unit.
Decrease Temperature
Press this button to increase the temperature by one (1) degree increments. 34ºF is
the lowest available temperature on this unit.
Interior Light
Press this button to cycle through the different internal light settings. There are
three light settings: Cloud White, Deep Blue and Amber.
ºF/ºC Selector
Hold the Increase and Decrease Temperature buttons at the same time to switch the
display temperature.

Internal Light

This refrigerator is equipped with side internal lights that can be set to Cloud White, Deep
Blue or Amber. Because the unit comes with a glass door, the inside will be seen whether
the door is open or closed.
You can choose to display each color of light in two different modes: Display mode and
Automatic Mode.
34ºF-50ºF.
17