Zephyr Preserv PRB24C01BG Guide D'utilisation, D'entretien Et D'installation page 4

Safety Information
For your safety, read all instructions carefully before operating the
appliance.
DANGER: When using an electrical appliance, basic precautions should
always be followed to reduce the risk of fire, electric shock, and injury to
persons.
WARNING: To reduce the risk of fire, electric shock or personal injury,
unplug or disconnect the appliance from the power supply before
servicing.
CAUTION: Flammable refrigerant used! When handling, moving and use
of the refrigerator, make sure to avoid either damaging the refrigerant
tubing, or increasing the risk of a leak.
Use this appliance only as described in this manual. Other uses not recommended
⚫
may cause fire, electric shock or personal injury.
This appliance is not intended for use by young children or infirm persons unless
⚫
they have been adequately supervised by a responsible person to ensure that
they can use the appliance safely.
Young children should be supervised to ensure that they never play with the
⚫
appliance.
The temperature range for this cooler is optimized for non-perishable beverage
⚫
storage only. Do not store perishable food items in your beverage cooler.
To protect against the risk of electric shock, NEVER IMMERSE the unit, cord, or
⚫
plug in water or spray any other liquid.
Unplug the appliance from the plug socket when not in use, when moving from
⚫
one location to another and before cleaning.
To disconnect the appliance, grip the plug and pull it from the wall outlet. Never
⚫
pull by the cord.
Never operate the appliance in the presence of explosive and/or flammable
⚫
fumes.
Never place the appliance or any of its parts near an open flame, cooking or other
⚫
heating appliance.
Never operate the appliance with a damaged cord or plug, if the product
⚫
malfunctions, or if it is dropped or damaged in any manner.
The use of attachments not recommended by the manufacturer may be
⚫
hazardous.
Never operate if the housing is removed or damaged.
⚫
A loose fit between the AC outlet (receptacle) and plug may cause overheating and
⚫
a distortion of the plug. Contact a qualified electrician to replace loose or worn
outlet.
Locate the unit away from direct sunlight and sources of heat (stove, heater,
⚫
radiator, etc.).
4