Operating Your Appliance; Using The Control Panel - Zephyr PRESRV PRB15C01BG Guide D'utilisation, D'entretien Et D'installation

ZEPHYRONLINE.COM
If the unit is unplugged, power lost, or turned off, you must wait 3 to 5 minutes before restarting the
unit. If you attempt to restart before this time delay, the appliance may not start and will not keep the
last set temperature.

Using the Control Panel

Power Button
Press and hold this button for three seconds to power your unit on or off. While the unit is on,
the R "Compressor Running" light may illuminate to indicate the internal compressor is active.
Increase Temperature
Press this button to increase the temperature by one (1) degree increments. 50ºF is the highest
available temperature on this unit.
Decrease Temperature
Press this button to decrease the temperature by one (1) degree increments. 34ºF is the lowest
available temperature on this unit.
Interior Light
Press this button to cycle through the different internal light settings. There are three light
settings: Cloud White, Deep Blue and Amber.
ºF/ºC Selector
Hold the Increase and Decrease Temperature buttons at the same time to switch the display
temperature.
NOTE: The beverage cooler is equipped with a temperature memory function. If power is suddenly
lost, the previous set temperature will be saved, and the cooler will return to this setting once
power is restored.
PRB15C01BG Use, Care, and Installation Guide
This beverage cooler has a temperature range from 34ºF-50ºF.

Operating Your Appliance

21