Operating Your Appliance; Using The Control Panel - Zephyr PRWB24C32BG Guide D'utilisation, D'entretien Et D'installation

Operating Your Appliance

If the unit is unplugged, power lost, or turned off, you must wait 3 to 5 minutes before restarting the
unit. If you attempt to restart before this time delay, the appliance may not start and will not keep the
last set temperature.

Using the Control Panel

This wine and beverage cooler has a temperature range from 40ºF-65ºF for the wine side
Power Button
Press and hold this button for three seconds to power your unit on or off. While the unit is on,
the R "Compressor Running" light may illuminate to indicate the internal compressor is active.
Increase Temperature
Press this button to increase the temperature by one (1) degree increments. 65ºF is the highest
available temperature on this unit.
Decrease Temperature
Press this button to increase the temperature by one (1) degree increments. 40ºF is the lowest
available temperature on the wine side and 34ºF is the lowest available temperature on the
beverage side
Interior Light
Press this button to cycle through the different internal light settings. There are three light
settings: Cloud White, Deep Blue and Amber.
ºF/ºC Selector
Hold the Increase and Decrease Temperature buttons at the same time to switch the display
temperature.
NOTE: The wine and beverage cooler is equipped with a temperature memory function. If power is
suddenly lost, the previous set temperature will be saved, and the cooler will return to this
setting once power is restored.
20
R
left zone right zone
and 34ºF-65ºF for the beverage side.
PRWB24C32BG Use, Care, and Installation Guide
P R E S R V ™
W I N E & B E V E R A G E
C O O L E R
D U A L ZO N E