Philips AVENT SCD610 Mode D'emploi page 4

Only use attachments/accessories specified by the manufacturer.
i
Use this apparatus only for its intended use as described in this manual.
j
Do not overload wall outlets and extension cords as this can result in the
k
risk of fire or electric shock.
Never push objects of any kind into this apparatus through casing slots as
l
they may touch dangerous voltage points or short out parts that could result
in a risk of fire or electric shock.
The apparatus shall not be exposed to dripping or splashing and no objects
m
filled with liquids, such as vases, shall be placed on the apparatus.
Do not place any sources of danger on the apparatus (like liquid-filled
n
objects, lighted candles etc.).
Refer all servicing to qualified service personnel. Servicing is required when
o
the apparatus has been damaged in any way, such as power-supply cord
or plug is damaged, liquid has been spilled or objects have fallen into the
apparatus, the apparatus has been exposed to rain or moisture, does not
operate normally, or has been dropped. For assistance, visit our website
www.philips.com/ AVENT or call 1-800-54-AVENT (1-800-542-8368).
This product may contain lead and mercury. Disposal of these materials may
p
be regulated due to environmental considerations. For disposal or recycling
information, please contact your local authorities or the Electronic Industries
Alliance: www.eiae.org.
Warning
•
To prevent strangulation with the power cord, always keep the baby unit and the power cord out
of baby's reach, at least 1 meter/3.5 feet away. Do not use extension cords.
Caution: Risk of explosion, electric shock, short circuit, or leakage
•
The apparatus shall not be exposed to dripping or splashing and no objects filled
with liquids, such as vases, shall not be placed on the apparatus.
•
Before you connect the baby monitor to the mains, make sure that the voltage
indicated on the adapters of the baby monitor corresponds to the local mains
voltage.
•
Where the MAINS plug is used as the disconnect device, the disconnect device
shall remain readily operable.
•
Use the supplied adapter to connect the baby unit to the mains.
•
Use the supplied adapter to charge the parent unit.
•
To prevent electric shock, do not open the housing of the baby unit or parent unit
except for the battery compartments.
4