Table Des Matières; Safety Instructions - THERMOBILE IMAC Manuel De L'utilisateur

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

English
Contents
English
Safety instructions............................................... 6
Introduction ......................................................... 8
Preparations........................................................ 9
Operation .......................................................... 10
Maintenance...................................................... 11
Troubleshooting ................................................ 12
Spare parts........................................................ 14
Technical information ........................................ 14
Installation of accessories ................................. 15
Standards and guidelines.................................. 15
Preface
This manual contains the instructions for use of
the convector heater shown on the cover.
The information in this manual is important for the
correct and safe operation of the convector
heater.
Identification of the product (fig. 2)
The identification plate is mounted on the side of
the convector heater. The identification plate
contains the following information:
A
Type of machine
B
Model number
C
Gas type
D
Max. input
E
Normal input
F
Gas consumption
G
Inlet gas pressure
H
Voltage / frequency
I
Run current
J
Fabrication year
K
Serial number
Service and technical support
For information about the convector heater,
please contact your dealer of the manufacturer.
Make sure you have the following information at
hand: type and serial number of the convector
heater.
Warranty and liability
For warranty and liability, please refer to the
general warranty conditions.
Environment
Note
The convector heater is made of various
metals and synthetic materials.
The heater also contains a number of
electronic parts, which have to be
treated as electronic waste. Please
contact your dealer for details.
6
1
1.1
1.2
A
Lifting hooks
B
Shafts for lifting using a fork-lift truck
To find out the weight of the convector heater,
refer to the tables in Appendix B at the back of
this manual.
1.3
Hoist the heater according to the instructions on
the heater.
1.4
A
Hoisting instruction
B
Reset keys of the thermostat
1.5
A
Burner identification data
B
Warning
40.020.956 - rev. 03 - 2010

SAFETY INSTRUCTIONS

Icons used in the manual
Caution
Points to risk of damage to the
equipment.
Warning
Points to a dangerous situation, which
may result in death or serious injury.
Warning
Always switch off the power supply
before carrying out any maintenance of
repair work to the convector heater!
Hot
Some surfaces may be hot! Wait until
these parts have cooled down before
carrying out any maintenance.
Suggestions and tips to facilitate the
necessary tasks or actions.
Lifting instructions IMAC (fig. 1)
Warning
Do not use any unsuitable material for
lifting the convector heater.
Lifting instructions IMA
Pictograms on the heater (fig. 3)
Icons on the burner (fig. 4)
IMAC - IMA - G US

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

ImaG us

Table des Matières