Maintenance And Storage; Long Term Storage - Ardisam ION 11733 Manuel De L'opérateur

MAINTENANCE AND STORAGE

Read the maintenance schedule and observe these recommen-
dations to extend the life of your electric auger.
Good maintenance is essential for safe, economical, and trou-
ble-free operation. To help you properly care for your powerhead,
the following pages include a maintenance schedule, routine
inspection procedures, and simple maintenance procedures us-
ing basic hand tools. Other service tasks that are more difficult, or
require special tools, are best handled by professionals and are
normally performed by a technician or other qualified mechanic.
The maintenance schedule applies to normal operating condi-
tions. If you operate your powerhead under unusual conditions,
such as sustained high-load, or use in unusually wet conditions,
consult ION® customer service for recommendations applicable
to your individual needs and use.
MAINTENANCE AND SCHEDULE
MAINTENANCE ITEM
Check bolts and nut
Battery Charge
Replace
Sharpen/Replace Blades
TRANSPORTING YOUR ICE AUGER
• Remove the battery if transporting the auger.
LONG-TERM STORAGE
If your ice auger will not be run for more than one month,
prepare it for long-term storage.
1. Charge the battery and leave it off of the unit. DO NOT leave
the battery on the charger. Store the battery in tempera-
tures between 40˚ F- 120˚ F.
2. Remove the auger from the powerhead and apply a thin
layer of grease to the drive shaft. SEE FIGURE 6
3. Remove all debris from auger and powerhead.
4. Attach the blade protector to bottom of auger.
5. Keep in a dry, moisture-free area.
8
Every 500
Before each complete
day's use charges Yearly
X
X
X
Check for parts online at www.ioniceaugers.com or call 800-345-6007 M-F 8-5 CT
IMPORTANT
CONNECT THE BATTERY TO THE CHARGER EVERY
THREE MONTHS TO ENSURE THAT IT MAINTAINS A
FULL CHARGE DURING EXTENDED STORAGE.
allen wrench
bolt
FIGURE 6
X
Operator's Manual
ION® Electric Ice Auger
powerhead
drive shaft
protective cap
auger