Dibo SBH-E Serie Mode D'emploi page 107

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Manual operation of lighting is indicated on this page.
The hours of lighting can be adjusted separately. If both times are set on 0:00, the lighting will only light (on the
box) when a coin is inserted in the coin acceptor of the box.
When the off- time is set on for example 24.00h, the lights will go off after this set time. When a client want to
use the car wash after this hour, the box where he inserts a coin in the coin acceptor will light up.
You can also add an extra waiting period after closing time.
Here you also can see the setting (possible to change), luminance and night message of the lighting (not pos-
sible to change). The night message is a visualisation of the luminance regulation
Attention: with delay, after waiting time!
The luminance = the sensitivity of the sensor , please do not change this setting (normally this parameter is fac-
tory set to 90-100 %).
Note: place the black cap on the sensor!
The opening hours (screen below) can be entered in order to switch the car wash automatically on and off at a
certain point of time. When switched off, still active washes are taking into account.
SBH-E : REV A
DiBO n.v. 107

Publicité

Table des Matières
loading

Table des Matières