Publicité
Les langues disponibles
Les langues disponibles
EN: Mounting ESM knife bar
G90900102
Dokument: G90950115
Fit the skids to the left and right of
the beam from below.
With the cutter bar attached, adjust
the cutting height on the skids.
Recommendation: 6-7 cm
Carry out a test run.
Observe maximum engine speed
for ESM double-blade cutter bar:
Max. 2,600 rpm.
Maintenance instructions:
Operational malfunctions caused by insufficient
maintenance can result in high repair costs. Regular
maintenance is essential!
First oil change after 50 - 60 operating hours.
•
(0.8 L gear oil SAE 80W-90 API GL-5)
Lubricate every 4-6 operating hours, after each
•
mowing operation or high-pressure cleaning.
•
Regularly check bearing points for wear
Ensure that all screw connections are firmly seated
•
(observe tightening torques).
Have repairs carried out exclusively by specialist
•
workshops
Service documents:
www.parts-and-more.com
Page 11
www.as-motor.de
Publicité
