Ec Declaration Of Conformity; Instruction Manual; General Power Tool Safety Warnings; Grinder Safety Warnings - Makita GA4051R Manuel D'instructions

Work mode: surface grinding with anti vibration side grip
Model
GA4051R
GA4551R
GA5051R
Work mode: disc sanding with normal side grip
Model
GA4051R
GA4551R
GA5051R
Work mode: disc sanding with anti vibration side grip
Model
GA4051R
GA4551R
GA5051R
NOTE: The declared vibration total value(s) has been measured in accordance with a standard test method and
may be used for comparing one tool with another.
NOTE: The declared vibration total value(s) may also be used in a preliminary assessment of exposure.
WARNING:
The vibration emission during actual use of the power tool can differ from the declared
value(s) depending on the ways in which the tool is used especially what kind of workpiece is processed.
WARNING:
Be sure to identify safety measures to protect the operator that are based on an estimation
of exposure in the actual conditions of use (taking account of all parts of the operating cycle such as the
times when the tool is switched off and when it is running idle in addition to the trigger time).
WARNING:
The declared vibration emission value is used for main applications of the power tool. However if
the power tool is used for other applications, the vibration emission value may be different.

EC Declaration of Conformity

For European countries only
The EC declaration of conformity is included as Annex A
to this instruction manual.
SAFETY WARNINGS

General power tool safety warnings

WARNING:
Read all safety warnings, instruc-
tions, illustrations and specifications provided
with this power tool. Failure to follow all instructions
listed below may result in electric shock, fire and/or
serious injury.
Save all warnings and instruc-
tions for future reference.
The term "power tool" in the warnings refers to your
mains-operated (corded) power tool or battery-operated
(cordless) power tool.
Vibration emission (a ,
h AG
5.5
7.0
8.5
Vibration emission (a ,
h AG
2
2.5 m/s or less
2.5
2
2.5 m/s or less
Vibration emission (a ,
h AG
2
2.5 m/s or less
2
2.5 m/s or less
2
2.5 m/s or less

Grinder safety warnings

Safety Warnings Common for Grinding, Wire
Brushing Operations:
This power tool is intended to function as a
1.
grinder or wire brush. Read all safety warn-
ings, instructions, illustrations and specifica-
tions provided with this power tool. Failure to
follow all instructions listed below may result in
electric shock, fire and/or serious injury.
2. Operations such as polishing, sanding and
cutting-off are not recommended to be per-
formed with this power tool. Operations for
which the power tool was not designed may create
a hazard and cause personal injury.
3. Do not use accessories which are not specifi-
cally designed and recommended by the tool
manufacturer. Just because the accessory can
be attached to your power tool, it does not assure
safe operation.
The rated speed of the accessory must be at
4.
least equal to the maximum speed marked on
the power tool. Accessories running faster than
their rated speed can break and fly apart.
The outside diameter and the thickness of your
5.
accessory must be within the capacity rating
of your power tool. Incorrectly sized accessories
cannot be adequately guarded or controlled.
6 ENGLISH
2
) : (m/s ) Uncertainty (K) : (m/s
1.5
1.5
1.5
2
) : (m/s ) Uncertainty (K) : (m/s
1.5
1.5
1.5
2
) : (m/s ) Uncertainty (K) : (m/s
1.5
1.5
1.5
2
)
2
)
2
)