Charge Of The Battery - BH Easy Motion Neo Manuel De L'utilisateur

EN
U S E R M A N U A L

Charge of the battery

Due to its advanced Ion-Lithium technology, reaching a full discharge of the battery before connecting it to the charger
is not necessary. Likewise, fully charging the battery to its 100% capacity before use is not necessary. But take into
consideration that in order to obtain a maximum operation range a full charge is recommended.
The following indications shall be carried out when charging the battery in the rear carrier:
1. The user may charge the battery by either
removing it from beneath the luggage rack or
directly without removing it from the rack. In
the latter case, charging must be carried out
with the pedal assistance system turned off.
2. The user shall open the battery's lock using
the key provided.
3. The user shall carefully remove the battery
from the rack.
4. The user must turn off the charger before
proceeding the charging.
5. The user must connect the charger to the
battery and to a common outlet which
supplies 220 V.
6. The user must turn on the charger. A red LED
(indicating that the charger is connected to
the mains) and a yellow LED (indicating that
the battery isn't fully charged) will light on the
charger.
7. Once the yellow LED turns green, this means
that the battery is fully charged to its 100%
capacity.
The following indications shall be carried out when charging the battery integrated in the frame:
1. The user must open the lock located in the frame.
2. The user will turn and slide the battery out of
the frame.
3. The user must turn off the charger before
proceeding the charging.
4. The user must connect the charger to the
battery and to a common outlet which
supplies 220 V. The user must turn on the
charger. A red LED (indicating that the charger
is connected to the mains) and a yellow LED
(indicating that the battery isn't fully charged)
will light on the charger.
5. Once the yellow LED turns green, this means
that the battery is fully charged to its 100%
capacity.
2 8