Dyna-Glo DGU732BDE Mode D'emploi page 11

ASSEMBLY INSTRUCTIONS
3. Remove the 2 pre-assembled M5 x 12 mm
screws (AA) from the smoker cabinet assembly
(A). Insert the 2 screws into the rear handle (B)
and into the threaded holes in the smoker cabinet
assembly (A). Tighten the screws.
Hardware Used
M5 x 12 mm
AA
Screw
4. Place the grease tray (J) on the bottom of the
smoker cabinet assembly (A) as shown.
x 2
11
3
A
4
A
J
B
AA