Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
10 – Display and Confi guration
1
10-9 Output Setup Menu
•
4
From the "FREQUENCY" screen, use the scroll buttons (
2
to select the desired setting and press the enter button (
confirm the setting. Note: The output frequency setting is only
used when the UPS system starts from battery or when frequency
converter mode (see step 6) is enabled.
3
4
•
From the "ECONOMIC MODE" screen, use the scroll buttons
5
( , ) to select the desired setting and press the enter button (
to confirm the setting.
5
6
•
6
From the "FREQ CONVERTER MODE" screen, use the scroll
buttons ( , ) to select the desired setting and press the enter
button (
) to confirm the setting.
Note: Press the "ESC" button to return to the previous menu.
7
8
10-10 Battery Setup Menu
Note: The UPS system must be in bypass mode to change the battery parameters. The battery parameters must be set correctly in order to receive
9
accurate runtime estimates from the UPS system when it switches to battery backup mode.
•
Enter the UPS system setup menu as described in
1
Use the scroll buttons ( , ) to move the cursor to "BATTERY
SETUP", then press the enter button (
10
11
•
Use the scroll buttons (
2
one of the menu choices.
12
13
14
(continued)
Section
).
, ) and the enter button (
) to select
(continued)
, )
) to
4
)
5
6
10-7.
1
2
38
Publicité
Chapitres
Table des Matières
