Cleaning And Maintenance; Technical Specifications - Velleman HQ POWER VDL75ST Notice D'emploi

5.

Cleaning and Maintenance

1. All screws should be tightened and free of corrosion.
2. The housing, visible parts, mounting supports and the installation location (e.g. ceiling,
suspension, trussing) should not be deformed, modified or tampered with e.g. do not drill extra
holes in mounting supports, do not change the location of the connections ...
3. Moving mechanic parts must not show any signs of wear and tear.
4. The electric power supply cables must not show any damage. Have a qualified technician
maintain the device.
5. Disconnect the device from the mains prior to maintenance activities.
6. Wipe the device regularly with a moist, lint-free cloth. Do not use alcohol or solvents.
7. There are no user-serviceable parts.
8. Contact your dealer for spare parts if necessary.
6.

Technical Specifications

Power Supply
Power Consumption
Fuse
Dimensions
Total Weight
Max. Ambient Temperature
Use this device with original accessories only. Velleman Components nv cannot be held
responsible in the event of damage or injury resulted from (incorrect) use of this device.
For more info concerning this product, please visit our website www.hqpower.com. The
information in this manual is subject to change without prior notice.
© COPYRIGHT NOTICE
This manual is copyrighted.
The copyright to this manual is owned by Velleman Components nv. All worldwide rights reserved.
No part of this manual may be copied, reproduced, translated or reduced to any electronic medium
or otherwise without the prior written consent of the copyright holder.
VDL75ST
max. 230VAC / 50Hz
75W
fast 2A, 250Vac
Ø190 x 210mm
1.5kg
45°C
4 VELLEMAN®