Selecting A Preset Station; Using The Remote Controller - JVC KW-XR611 Manuel D'instructions

When an FM stereo broadcast is
hard to receive
1
2
] <TUNER> ] <MONO> ]
<MONO ON>
Reception improves, but stereo effect
will be lost.
To restore the stereo effect, repeat the same
procedure to select <MONO OFF>.
Automatic presetting (FM)—
SSM (Strong-station Sequential Memory)
You can preset up to 18 stations for FM.
While listening to a station...
1
2
] <TUNER> ] <SSM> ]
<SSM 01 – 06 / SSM 07 – 12 /
SSM 13 – 18>
"SSM" flashes and local stations with
the strongest signals are searched and
stored automatically.
To preset another 6 stations, repeat the above
procedure by selecting one of the other 6 SSM
setting ranges.
8 ENGLISH
[Hold]
[Hold]
Manual presetting (FM/AM)
You can preset up to 18 stations for FM and 6
stations for AM.
Ex.: Storing FM station of 92.50 MHz into preset
number "04."
1
] "92.50MHz"
2
[Hold]
"PRESET MODE" flashes.
3
] Selects preset number "04."
"P04" flashes and "MEMORY" appears.
• Pressing and holding the number buttons
(1 – 6) can also store the current station to the
selected number buttons (1 – 6).

Selecting a preset station

1
or
2
• Pressing the number buttons (1 – 6) can also
select the preset stations (1 – 6).
Changing the display information (for
non-FM Radio Data System and AM
station)
Frequency = Clock = (back
to the beginning)

Using the remote controller

5 U / D ∞ : Changes the preset
2 R / F 3 : Searches for stations
stations