Listening To The Dab Tuner; Storing Dab Services In Memory - JVC KW-XR611 Manuel D'instructions

Listening to the DAB tuner

Before operating, connect the JVC DAB tuner, KT-DB1000 (not supplied) to the expansion port on
the rear of the unit.
• For details, refer also to the instructions supplied with the JVC DAB tuner.
~
] "DAB"
Ÿ
] Search for an ensemble.
When an ensemble is tuned in,
searching stops. To stop searching,
press the same button again.
Manual search for an ensemble
[Hold]

Storing DAB services in memory

You can preset six DAB services (primary).
Ex.: Storing an ensemble (primary service) into
the preset number "04."
1
Select a service (steps ~ to ! ).
2
"PRESET MODE" flashes.
3
] Selects preset number "04."
"P04" flashes and "MEMORY" appears.
• Pressing and holding the number buttons
(1 – 6) can also store the current service to the
selected number buttons (1 – 6).
20 ENGLISH
"M" flashes, then press
the button repeatedly.
[Hold]
!
] Select a service (primary or
secondary) to listen to.
Selecting a preset service
1
or
2
• Pressing the number buttons (1 – 6) can also
select the preset services (1 – 6).
Changing the display information
Service name = Ensemble
name = Channel number
= Frequency = Clock =
(back to the beginning)
Using the remote controller
5 U / D ∞ : Changes the DAB
2 R / F 3 : Searches for DAB
preset stations
stations