JVC KW-XR611 Manuel D'instructions page 25

Category Menu item
BUTTON ZONE
DISP ZONE
Display zone
ALL ZONE
DAY COLOR
NIGHT COLOR
MENU COLOR
RING COLOR *
9
FADER *
BALANCE *
LOUD
Loudness
VOL ADJUST
Volume adjust
* 8 Displayed only when Bluetooth adapter, KS-BTA200 is connected.
9
* If you are using a two-speaker system, set the fader level to "00."
* 10 This adjustment will not affect the subwoofer output.
Selectable setting, [
COLOR 01 —
COLOR 29, USER
• BUTTON ZONE
• DISP ZONE
• ON
• OFF
8
• ON
• OFF
R06 – F06
[ 00 ]
10
L06 – R06
[ 00 ]
• LOUD ON
• LOUD OFF
VOL ADJ –05 —
VOL ADJ +05
[ VOL ADJ 00 ]
Initial: Underlined
: For settings, 27. [ COLOR 06 ]
: For settings, 27. [ COLOR 01 ]
: For settings, 27. [ COLOR 06 ]
: For settings, 28.
: Changes the display and buttons (except for
0 / DISP ) illumination during menu, list search
and playback mode operations.
: The display and buttons illuminate in the color
that you have set.
: When a call comes in, the display will flash in
blue.
• The display will change to the original color
when the call is answered or the incoming
call stops.
When the unit receives a text message, the
display only illuminate in blue.
: Cancels.
: Adjust the front and rear speaker output
balance.
: Adjust the left and right speaker output
balance.
: Boost low and high frequencies to produce a
well-balanced sound at a low volume level.
: Cancels.
: Preset the volume adjustment level of
each source (except FM), compared to the
FM volume level. The volume level will
automatically increase or decrease when you
change the source.
• Before making an adjustment, select the
source you want to adjust.
• "VOL ADJ FIX" appears on the display if "FM" is
selected as the source.
]
ENGLISH 25