afriso Minimelder-R Notice Technique page 56

EN
5.3.5 Retrofitting an EnOcean® wireless module (optional)
ELECTROSTATIC DISCHARGE
• Always earth yourself before touching electronic components.
• Do not touch the EnOcean® wireless module to plug it in; use the anti-elec-
trostatic film to plug it into the slot.
Failure to follow these instructions can result in equipment damage.
Verify that the mains voltage is interrupted and cannot be switched on.
1. Open the control unit.
A. Slot for EnOcean® wireless
module
B. Position antenna
22
A
Minimelder-R / Maximelder-R
Mounting
NOTICE
C. Housing opening (for fastening
the antenna)
B
C