Product Description - Afriso Minimelder-R Notice Technique

EN
The float switch is mounted in such a way that it is suspended at the
height/level of the required switching point. The floating probe is connected
to the control unit by means of a two-wire probe cable.
Control unit
The control unit contains the following elements in an impact-resistant plastic
housing: display elements and controls as well as all electronic components
for signal processing and conversion of the probe signal into a digital output
signal. The output signal is available via a voltage-free relay contact (change-
over contact).
Fig 2: Control unit
8

Product description

Minimelder-R / Maximelder-R
A. Designation of product
A
B. Green LED
B
C. Test key
D. Red LED
C
E. Acknowledge button
F. Without function
D
G. LRN pushbutton
H. Icon from AFRISOhome
E
app
I. Type designation of the
F
product
G
H
I