ITW Food Equipment Group VULCAN VCCB25 Manuel D'installation Et D'utilisation page 12

PLATE RAIL ACCESSORY INSTALLATION
The charbroiler and its parts are hot. Use care when operating, cleaning or
servicing the charbroiler.
1. Brackets are reversible – align holes on bottom of plate with slots on the bracket as shown. Attach parts
using the included self-tapping screws. Repeat for other side.
SLOTS & HOLES
PLATE
BRACKET
.
2 Mate the plate assembly to the charbroiler bullnose and align slots with screws in the front panel. Remove
screws from front panel and reinsert through the mount brackets.
ATTACH
SCREWS
MATE PLATE TO
BULLNOSE
12
- -