Time / Timer / Alarm (Model 10030660) - auna Belle Epoque 1908 Manuel

EN
48

TIME / TIMER / ALARM (MODEL 10030660)

Model 10030660 has two operating modes:
• Standby mode: The display shows the current time and the speakers
and backlight are switched off.
• Playback mode: The blue backlight is on and you can listen to music.
If no sound is produced, the unit automatically switches to standby mode
after 15 minutes. To switch between playback and standby mode, press the
volume control.
Set the current time
Note: The unit must be in standby mode for this.
1. Press and hold the STOP button. The digits [12/24] flash on the display.
Press the button
Press the STOP button again to confirm.
2. The hour digits flash on the display. Press the
repeatedly to set the current number of hours. Press the STOP button to
confirm.
3. The minute digits flash on the display. Press the
repeatedly to set the current number of minutes. Press the STOP button
to confirm.
4. The year digits flash on the display. Press the
repeatedly to set the current year. Press the STOP button to confirm.
5. The month digits flash on the display. Press the
repeatedly to set the current month. Press the STOP button to confirm.
6. The day digits flash on the display. Press the
repeatedly to set the current day. Press the STOP button to confirm.
or repeatedly to set the desired time format.
or button
or button
or button
or button
or button