Maintenance - Belling BE444687 Notice D'utilisation

Removal of the Wire Shelf
To remove the wire rack, pull the wire rack
as shown in the figure. After releasing it
from the clips (a), lift it up.
a

5.2 mAintenAnce

WARNING: The maintenance of this
appliance should be carried out by an
authorised service person or qualified
technician only.
Changing the Oven Lamp
WARNING: Switch off the appliance
and allow it to cool before cleaning
your appliance.
• Remove the glass lens, then remove the
bulb.
• Insert the new bulb (resistant to 300 °C)
to replace the bulb that you removed
(230 V, 15-25 Watt, Type E14).
• Replace the glass lens, and your oven
is ready for use.
The lamp is designed specifically for
use in household cooking appliances.
It is not suitable for household room
illumination.
5.3 mAintenAnce
WARNING: The maintenance of this
appliance should be carried out by an
authorised service person or qualified
technician only.
Other Controls
• Periodically check expiratation date of
the gas connection pipe.
• Periodically check the gas connection
pipe. If a defect is found, contact an
authorised service provider to have it
changed.
• If a defect is found while operating the
control knobs of the appliance, contact
an authorised service provider.
EN - 29