Transport - Belling BE444687 Notice D'utilisation

Cooking is uneven
within the oven.
Oven light (if
available) does not
operate.
The timer buttons
cannot be pressed
properly.
The oven fan (if
available) is noisy.

6.2 trAnsport

If you need to transport the product, use the original product packaging and carry it using
its original case. Follow the transport signs on the packaging. Tape all independent parts to
the product to prevent damaging the product during transport.
If you do not have the original packaging, prepare a carriage box so that the appliance,
especially the external surfaces of the product, is protected against external threats.
Oven shelves are incorrectly
positioned.
Lamp has failed.
Electrical supply is disconnected or
switched off.
There is foreign matter caught
between the timer buttons.
Touch model: there is moisture on the
control panel.
The key lock function is set.
Oven shelves are vibrating.
Check that the recommended temperatures and
shelf positions are being used.
Do not frequently open the door unless you are
cooking things that need to be turned. If you
open the door often, the interior temperature will
be lower and this may affect the results of your
Replace lamp according to the instructions.
Make sure the electrical supply is switched on at
Remove the foreign matter and try again.
Remove the moisture and try again.
Check whether the key lock function is set.
Check that the oven is level.
Check that the shelves and any bake ware are not
vibrating or in contact with the oven back panel.
EN - 31
cooking.
the wall socket outlet.