Vollrath FC-6IH-01120 Manuel De L'opérateur page 6

OPERATION (CONTINUED)
Lock and unlock a control panel (optional)
A control panel can be locked to prevent accidental changes.
1. To lock, simultaneously press and momentarily hold
160
160
2. To unlock, repeat step 1. The lock icon will disappear from the display.
Use the Master On/Off button to Set Defaults
Automatically set which wells and/or induction capsules turn on and the setting for each when the drop-in is turned on.
To set or reset the defaults:
1. Press to turn on the drop-in.
2. Use the individual control panels to turn on or off each well and induction capsule, and set the power/temp level.
3. Press to turn off the drop-in.
4. Press to turn on the drop-in. The heating zones that were off in step 2 will remain off, and the heating zones in step 2 that were on will turn
on. The temperature and power settings last used will be the new default settings.
Note: Control panels that are locked when the drop-in is turned off by pressing the master power button, will remain locked the next time the drop-
in is turned on.
6
and . The display will show the lock icon.
Modular Induction Dry Well Drop-ins Operator's Manual