Record Your Serial Number; Features And Controls - Vollrath FC-6IH-01120 Manuel De L'opérateur

RECORD YOUR SERIAL NUMBER

The serial number for your Modular Induction Dry Well Drop-in can be
found on the rating plate. To aid in future communication about your
product, please record the serial number in the space below.

FEATURES AND CONTROLS

A Main Power. Included on only multi-well drop-ins. Turns on power to the drop-in.
B Individual Well Control Panel. Controls the induction capsules in each well.
C Back Induction Capsule. Selects the back induction capsule.
D Front Induction Capsule. Selects the front induction capsule.
E Sync. Sets the front and back induction capsules to the same temperature or power level.
F Display. Displays the settings.
G Temperature LEDs. ºF or ºC illuminate to indicate the temperature setting.
H Lock Symbol. Illuminates when the induction capsule settings are locked.
I Up. Increases the temperature or power level setting.
J Induction Capsule On/Off Power. Turn on/off power for each induction capsule or well.
K Down. Decreases the temperature or power level setting.
L Function. Switch between temperature and power level modes and between temperature display in ºF and ºC.
M Induction Capsule. Houses the induction heating element.
N Sensor. Detects the temperature of the Vollrath induction-ready pan.
O Thermistor Assembly. Houses the sensor.
P Gasket.
Q Riser. Adjusts to accommodate 2¹⁄₂" and 4" deep pans.
R Air Intake. DO NOT BLOCK. Required for proper ventilation of electrical components. May be located in multiple positions on the drop-in.
2
C D
B
A
M
R
E F G
H
Modular Induction Dry Well Drop-ins Operator's Manual
Rating Plate
N
O
Q
I
J
K
L
P