Vollrath FC-6IH-01120 Manuel De L'opérateur page 5

OPERATION (CONTINUED)
Turn On/Off Power to an Induction Capsule(s)
Turn on/off a single induction capsule
1. Press to select induction capsule.
2. Press .
Set the Temperature or Power Level
Use the control panel to select settings for each induction capsule.
Press to switch between temperature and power level modes or change the temperature control to ºF or ºC.
Note: This equipment monitors the temperature of the induction-ready pan and automatically adjusts the output to maintain the user controlled
set point. Temperatures displayed may vary from actual food temperatures depending on the type of food and stirring frequency. For best
results adjust the settings as needed to achieve the desired temperature of each menu item. Some foods may require a higher setting to
hold at the desired temperature.
Note: The efficient induction technology of this drop-in heats the bottom of the pan. Heat will radiate up the pan to warm the sides, but they will
not be as hot as the bottom. This is normal operation.
One pan / same temperature or power level for both induction capsules
When using a single full-size pan, the sync function enables both induction capsules to operate as one.
1. Press
are in sync mode. In sync mode, settings apply to both induction capsules.
2. Press
Two pans / different temperature or power level for each induction capsule
Each induction capsule can be individually turned on and off, and have different heat settings. The heat mode, temperature or power will be
the same for both induction capsules.
1. Press
capsule is selected.
Back
2. Press
Front
3. Press the other
induction capsule is selected.
4. Press
Modular Induction Dry Well Drop-ins Operator's Manual
Turn on/off both induction capsules at once
1. Press
2. Press
to sync the induction capsules. The border around the button will turn blue to indicate the induction capsules
or to select a temperature or power level. The setting for both induction capsules will change.
to select a induction capsule. The border around the button will turn blue to indicate the induction
or to set a temperature or power level.
to select the other induction capsule. The border around the button will turn blue to indicate the
or to set a temperature or power level.
.
.
5