Fire Grate; Wood Storage Compartment; Heating; Heating During The Transition Period - Olsberg Tenorio PowerSystem Compact Instructions

Fire grate

Operating lever for the fire grate
● With the help of the operating lever the fire grate can
be opened or closed to move the ash from the com-
bustion chamber to the ash pan by pushing the fire
grate back and forth.
● Primary air can only enter the combustion chamber
if the fire grate is set on open position.

Wood storage compartment

The wood storage compartment below the combus-
tion chamber is fitted with a magnetic pressure clo-
sure. It can be opened by lightly pressing on the but-
ton (Olsberg logo). Likewise it can be closed by light-
ly pressing.

Heating

● Only place the quantity of fuel required to achieve
the heating requirement.
For a nominal heating output 5 kW:
- max. 1,5 kg billet wood; burning time >45 min
­ max. 1,3 kg wood briquettes; burning time >45 min
For max. heat output allowed:
- max. 3 kg billet wood
­ max. 3 kg wood briquettes
● Open the combustion chamber door slowly for add-
ing new fuel, as otherwise the combustion gases can
escape.
● Empty the ash pan or combustion chamber in good
time. Otherwise it is possible for the combustion air
intake to be blocked or for the grate to be damaged.
● Only remove the ash pan to empty it.
● Clean the ash pan compartment regularly after re-
moving the ash pan to remove any ash that may
have been spilled (e.g. use a vacuum cleaner).
Attention:
Any stove and ash residues must have been left to
cool before being removed.

Heating during the transition period

Prerequisite for the stove to function well is the correct
delivery pressure (chimney draught). This very much
depends on the external temperature. Therefore, if the
external temperatures are high (above 16°C) the deliv-
ery pressure can be disrupted.
What to do?
● Open the combustion air slide valve complete.
● Only put on a small quantity of fuel.
● Frequently stoke the ash.
press here
17