Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
QUICK REFERENCE GUIDE
EN
DMX Linking
The Ovation FD-105WW will work with a DMX controller using a 3-pin or 5-pin DMX serial connection. A DMX Primer is
available from
www.chauvetprofessional.com.
DMX Connection
The Ovation FD-105WW uses a 3-pin or 5-pin DMX for its DMX personalities: 1: UNO, 2: DOS, or 3:STD.P. See the User
Manual for information about connecting and configuring the product for DMX operation.
Master/Slave Connection
The Ovation FD-105WW uses the DMX data connection for its Master/Slave mode. See the User Manual for information
about how to connect and configure the product for master/slave operation.
RDM (Remote Device Management)
Remote Device Management, or RDM, is a standard for allowing DMX-enabled devices to communicate bi-directionally
along existing DMX cabling. The Ovation FD-105WW supports RDM protocol that allows feedback to monitor
temperature and changes to DMX Address, DMX Personality, Dimmer Mode, and LED Frequency menu options.
Download the User Manual from
www.chauvetprofessional.com
for more details.
Dimmer Control
The Ovation FD-105WW may be plugged into and controlled using a regular dimmer. In this mode, the product reacts
exactly like an incandescent product. See the User Manual to configure Dimmer Control operation.
Mounting
Before mounting this product, read the
Safety
Notes. Use at least one mounting point per product. Make sure the
mounting clamps are capable of supporting the weight of the product. For our Chauvet line of mounting clamps, go to
http://trusst.com/productcategory/truss-clamps/
Product Mounting Diagram
Overhead Mounting
Mounting Clamp
Mounting Bracket
Safety Cable
Passcode
After being prompted, enter the following passcode: <UP>, <DOWN>, <UP>, <DOWN>, <ENTER>. This
passcode cannot be changed and must be used whenever prompted.
Ovation FD-105WW QRG Rev. 1
2
Publicité
Table des Matières
