Editing The Reception Channel Of The Right Voice; Editing The Reception Channel Of The Left Voice; Editing The Reception Channel Of The Bass Voice; Editing The Transmission Channel Of The Right Voice - KETRON SD4 Manuel D'instruction

show "V1R", then the relative channel number. If you
continue to hold key 1 down, simply press the Value
+/- keys to increase or decrease the number of the
channel of the Right voice. Here's the map of the fun-
ctions of each individual key of the numerical keypad
within the Midi menu.
edItIng the reCeptIon Channel oF the rIght voICe (voICe1 rxChannel)
• Hold key 1 down. The display shows "v1r" and then the value set, which ranges from 1 to 16.
• Edit the value using the value+/- keys.
edItIng the reCeptIon Channel oF the leFt voICe (voICe2 rxChannel)
• Hold key 2 down. The display shows "v2r" and then the value set, which ranges from 1 to 16.
• Edit the value using the value+/- keys.
edItIng the reCeptIon Channel oF the bass voICe (voICe3 rxChannel)
• Hold key 3 down. The display shows "v3r" and then the value set, which ranges from 1 to 16.
• Modificare il valore utilizzando i tasti value+/-.
edItIng the transmIssIon Channel oF the rIght voICe (voICe1 txChannel)
• Hold key 4 down. The display shows "v1t" and then the value set, which ranges from 1 to 16.
• Edit the value using the value+/- keys
edItIng the transmIssIon Channel oF the leFt voICe (voICe2 txChannel)
• Hold key 5 down. The display shows "v2t" and then the value set, which ranges from 1 to 16.
• Edit the value using the value+/- keys
edItIng the transmIssIon Channel oF the bass voICe (voICe3 txChannel)
• Hold key 6 down. The display shows "v3t" and then the value set, which ranges from 1 to 16.
• Edit the value using the value+/- keys
edItIng the lead Channel
The lead channel represents the channel set in mute mode when you press the lead off key
on the control panel of the instrument. It is usually set on channel MIDI 4.
To edit the set value:
• Hold key 7 down. The display shows "ldC" and then the value set, which ranges from 1 to 16.
• Edit the value using the value+/- keys.

edItIng the global transmIssIon Channel (global txChannel)

• Hold key 8 down. The display shows "GLT" and then the value set, which ranges from 1 to 16.
36