Klarstein PHANTASMA SKYFIRE Mode D'emploi page 20

EN
20
OPERATION
Notes on the Fuel
• The alcohol used in the fireplace should be stored in a shady and safe place.
• Use 95% bio-ethanol refined from plants.
Note: Use only bio-ethanol as fuel.
Ignite Fire
(1) Slowly pour the fuel into a clean, cool burner or burner pot. Use the funnel for
filling. Fill the burner to a maximum of 2/3. Do not fill too much fuel and do not
allow the fuel to come into contact with objects other than the inside of the burner.
Replace the bottle cap and place the bottle far away before lighting. Store the fuel
bottle in a dry, cool room. Do not store it in places where it may be exposed to
direct sunlight and warm up.
Note: Spilled alcohol may stain floors or furniture.
(2) If fuel has been spilled, clean and dry the affected areas before ignition.
(3) Do not add alcohol while the fire is burning or the burner is still hot. Wait 10-20
minutes for the burner to cool down before refilling with fuel.
(4) Use a fireplace lighter (not supplied) to ignite the alcohol.
(5) Make sure that all persons present are 20-30 cm away from the fireplace when you
ignite it.
Note: The flame begins to flicker slowly. The flame may initially be low and almost
invisible, so allow the flame 15 minutes to reach the optimum level.
(6) We recommend that you leave the fireplace burning until all the fuel has been
burned.