Trouble Shooting; Corrective Action - Parkside PSSPA 20-Li B2 Traduction Des Instructions D'origine

GB IE

Trouble shooting

In the event of an accident or malfunction, remove the battery from the device im-
mediately! Failure to comply may result in injuries from cuts.
Problem
Appliance
won't start
Intermittent
operation
Poor sawing perfor-
mance
Saw blade quickly
becomes blunt
34
Possible cause
Battery (21) not inserted
Battery (21) discharged
On/Off switch (2.1) defective
Motor defective
Internal loose contact
On/Off switch (2.1) defective
Saw blade (12/13) unsuit-
able for the workpiece to be
processed
Saw blade (12/13) is blunt
Incorrect sawing speed
Low battery power
Saw blade (12/13) unsuit-
able for the workpiece to be
processed
Too much pressure applied
Sawing speed too high

Corrective action

Insert battery (21) (See "Insert-
ing/removing the rechargeable
battery")
Recharge battery (21) (Observe
the separate operating instruc-
tions for the rechargeable batte-
ry and charger)
Send in to Service Centre for
repair
Send in to Service Centre for
repair
Insert a suitable saw blade
(12/13)
Insert a new saw blade
(12/13)
Adjust sawing speed
Charge the battery (21) (observe
the separate operating instruc-
tions for the battery and charger)
Insert a suitable saw blade
(12/13)
Reduce the pressure
Reduce the sawing speed