DeWalt DW0165 Manuel D'utilisation page 14

Press
2.
E
on and display the red laser dot.
Make sure the tool position setting
3.
(Figure
C 4
measurement.
Select
4.
• Press
(Figure
E 2
• Press
• Press
Type Menu (Figure
• Press the arrow buttons to select
• Press
Press to indicate that you want to add
5.
two measurements.
Point the tool's laser toward the wall
6.
or object whose distance you need to
measure (Figure
Press
7.
the tool to the first wall or object.
Point the tool's laser toward the next wall
8.
or object (Figure
Press
9.
add it to the previous measurement.
View the total of the two measurements at
10.
the bottom of the screen (Figure
Subtracting 2 Measurements
You can subtract one measurement from
another (Figure
Point the tool's laser (Figure
1.
a wall or object, and not toward anyone's
eyes.
Press
2.
on and display the red laser dot.
14
(Figure ) to turn the tool
A 3
) is correct for taking the
as the measurement type.
to display the Main Menu
)
to select .
to display the Measurement
).
E 3
.
).
I 1
to measure the distance from
).
I 2
to measure the distance and
).
J
A 1
(Figure ) to turn the tool
A 3
Make sure the tool position setting
3.
(Figure
measurement.
Select
4.
• Press
(Figure
• Press
• Press
Type Menu (Figure
• Press the arrow buttons to select
• Press
.
Press
5.
subtract one measurement from another.
Point the tool's laser toward the wall
6.
or object whose distance you need to
measure (Figure
Press
7.
the tool to the wall or object.
Point the tool's laser toward the wall or
8.
object whose distance is to be subtracted
from the first measurement (Figure
Press
9.
subtract it from the previous measurement.
View the difference between the two
10.
measurements at the bottom of the screen
(Figure
).
I 3
Measuring Continuously
To take a series of measurements as you move
around, change to Continuous Measure mode
(Figure
) toward
Point the tool's laser (Figure
1.
a wall or object, and not toward anyone's
eyes.
Press
2.
on and display the red laser dot.
) is correct for taking the
C 4
as the measurement type.
to display the Main Menu
).
E 2
to select .
to display the Measurement
E 3
.
to indicate that you want to
).
J 1
to measure the distance from
to measure the distance and
).
J 3
).
K
Figure ) to turn the tool
A 3
).
.
).
J 2
) toward
A 1