Panasonic MK-F800 Instructions De Fonctionnement page 31

TROUBLESHOOTING
Problem
There is abnormal vibration and
noise during operation.
The texture and consistency of
the processed ingredients did not
turn out well.
100_160419_MK-F800_Second_EU(UZ50E153).indb
O The Rubber Feet and/or the work top are not clean.
¨ Wipe off any dirt or stains with a clean damp cloth. The
¨
Rubber Foot is only effective when placed on a clean,

smooth and flat surface.
O The ingredients used for processing is either too much or too
hard.
¨ Ensure that the ingredients used are as stated, reduce the
¨
ingredients if it is over the stated amount.
O Some ingredients might be too difficult to process raw,
e.g.pumpkin.
¨ Precook might be necessary to soften the ingredients
¨
before processing, i.e. until a fork can easily pierce.
O Ingredient size is not according to the preparation method.
¨ Prepare accordingly to follow the size stated.
¨
O Processing certain ingredients at the same time may result in
lumps remaining for Frozen mode.
Auto Menu

O The Auto Menu's default processing duration is meant for
the stated ingredient amounts. Any other ingredient amounts
processed will affect the performance.
¨ Increase the processing duration by adjusting the Rotary
¨
Dial and process till the desired texture and consistency.
Manual Menu
O The maximum ingredient amount and processing duration are
meant to serve as a guideline, lesser ingredient amount and
different ingredients will affect the performance.
¨ Process the ingredients with a suitable duration till the
¨
desired texture and consistency.
31
Cause and Action
GB31
2016/04/19 16:56:52