Panasonic MK-F800 Instructions De Fonctionnement page 29

AFTER USE
Motor Housing / Rubber Foot
Wipe off any dirt or stains with a clean damp cloth.
Note:
• Ensure that the power cord is unplugged before cleaning the Motor Housing.
• Do not wash the Motor Housing under running water.
• Never use corrosive liquids (e.g. alcohol, thinner, etc) to clean the Motor Housing.
Cleaning with a Dishwasher
The Bowl and Bowl Lid of this appliance are dishwasher safe.
Note:
• Do not place these items near the dishwasher heater area as high temperatures may damage the parts.
Storing
Ensure all attachments and the Bowl are removed from the Motor Housing prior to storage.
1
To release the Rubber Foot suction of the Motor
Housing, press on the release lever located at the
bottom side of the Motor Housing at the same time as
seen in the above picture and lift up.
3
(i)
(i) Store the Knife Blade inside
the Bowl. The Storage Case
Unit is included to store the
other attachments. Store the
attachments in place as per
packaging condition.
100_160419_MK-F800_Second_EU(UZ50E153).indb
Release Lever
(ii)
(ii) List of attachments in Storage
Case Unit: Kneading Blade,
Citrus Cone, Thick Slicing
Blade, Thin Slicing Blade,
Fine Shredding Blade, Coarse
Shredding Blade, Julienne Blade,
Blade Stand, Grating Blade,
Whipping Blade and Brush.
29
2
Tilt the Motor Housing on its side, and proceed to wind
up the Power Cord around the Cord Winding Area
partially, leaving the Plug at the sides.
(iii)
(iii) Place the Storage Case Lid
beneath the Storage Case to
collect the drained water from
the washed attachments
Note:
• Dispose of the flexible plastic
cover after opening the Storage
Case.
GB29
2016/04/19 16:56:52