(Vii) Citrus Press - Panasonic MK-F800 Instructions De Fonctionnement

FOOD PROCESSOR
Ingredient Preparations for Citrus Press
Function Ingredient
Squeeze Citrus Fruit Continuous
Operating with Manual Menu
1

After completing the assembly steps, plug-in the plug
into the socket and turn on the Power Switch. The Mode
Indication L.E.D.s will light up and blink.
3
Place the half cut fruit with the cut side on top of the
Citrus Cone and press down fi rmly to extract juice.
During the driving operation, the Stop/Start Indication
L.E.D. will remain lit. Push the Stop/Start Switch to stop
the driving operation.
Note:
• Always ensure that the Citrus Cone is placed onto the Citrus Strainer before usage.
• Stop the processing periodically to remove the pulp remaining on the Citrus Strainer to ease the juice
extraction process.
• It is not recommended to operate the Citrus Press at speed levels higher than level 4.
• Avoid touching the Citrus Cone while it is turning.
100_160419_MK-F800_Second_EU(UZ50E153).indb
-CITRUS PRESS-
Max
Mode Operating Time (approx.)
Single Use
1000 mL
Speed:
Level 4

23
Preparation Method
Cut fruit into halves.
-
2
Select the Continuous mode and adjust to level 4 with
the Rotary Dial. Push the Stop/Start Switch to start the
operation.
4


After the processing is completed, switch off the Power
Switch and unplug from the socket. Remove the Citrus
Press attachment from the Bowl before pouring the
extracted juice out.



GB23
2016/04/19 16:56:50