Leckey Transat de bain Guide De L'utilisateur page 6

Le transat de bain est prévu pour l'emploi dans la baignoire ou la douche, avec l'emploi du chariot de douche
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

GB
Safety Instructions
1.
The weight limit on all four sizes of seat is
72kg. This should NEVER be exceeded.
2.
With the exception of the back recline
adjustment the advance bath seat should not
be adjusted whilst the user is in the seat. If
adjusting the back recline with a user in the
seat ensure while the lever is pulled up that
the backrest of the chair is secure by holding
onto the handles at the top of the bath seat
frame.
3.
We recommend that children should not be
left unattended at any time whilst using
Leckey equipment.
4.
If you are in any doubt as to the safe use of
your Leckey Bath Chair or Shower Trolley,
please cease using the product immediately
and contact your local dealer.
5.
We recommend that when the Shower
Trolley is stationary that all four castors are
locked and facing away from the trolley base.
6.
Although mobility is an important feature of
this product we do not recommend that users
be moved over uneven surfaces whilst in the
equipment. All due care and attention should
be taken if transporting the user in the
shower chair from one room to another.
7.
If moving your shower chair from one room
to another please steer by gripping onto the
handles at the top of the backrest.
How to Maintain
1.
The bath seat is manufactured from stainless
steel and plastic. When cleaning the bath
seat frame we would recommend that you
use warm water and a non-abrasive
detergent.
2.
The bath seat cover can be removed and
machine-washed at 60 degrees centigrade.
To remove the cover reverse the process of
attaching the cover as described in 1.0
"How to unpack and assemble"
3.
At least once a week check that all fixings
and fastenings are in good condition.
4.
We recomend that you do not use any type of
medication during the bathing process as this
may contribute to the breakdown of the
adhesive glue used to bond the moulding to
the stainless steel leg.

Publicité

Table des Matières
loading

Table des Matières