Range Of Applications; General Information / Safety Information - Schick Dental S2 Master Mode D'emploi

2. Range of Applications

The S2 Master milling machine is designed for use in dental laboratories
when trimming crowns and bridges, respectively acrylic and chrome cobalt dentures.
Highest precision and quality and minor maintenance are the merits
of the S2 Master which has been developed by experts in milling technics.
Conditions of environment:
- interior 5° - 40°
- up to 2.000 meter over sea level
Categorie of overvoltage: II
Grade of pollution: 2
3. General Information/Safety informations
- Ascertain that your mains supply coincides with the data in the rating
plate
- The milling machines S2 Master are not suitable for the following applications:
- in areas where there is a risk of explosion
- for medical applications
- Ensure that all regulatory requirements are observed during use (always waer
protective glasses).
- Under no circumstances should the milling machine be cleaned with
compressed air
- To keep the precision and the lifetime of the chuck always insert a rotary instrument
or the pin, supplied with the unit, page 13 (6) - even if the motor stands still.
- accessories like transfer unit, graphite lead holder, paralleling mandrel or similar
are not allowed to be used in the milling spindle.
The spindle may be started by mistake!
- Recycling
WEEE-Reg.-Nr. DE 78620387
Range of Applications / General information
4