Zephyr Essentials Pyramid ZPY-E30AB Guide D'utilisation, D'entretien Et D'installation page 12

Note: If using hood in recirculating mode skip these steps and turn to page 11.
Vertical Ducting
(7" Round)
1. Using a fl at-head screwdriver, remove both the
rectangular and round knock-out plates located on
top of hood
Vertical Ducting
(3-1/4"x10" Rectangular)
1. Using a fl at-head screwdriver, remove only the
rectangular section of the knock-out plate located
on top of hood.
Horizontal Ducting
(3-1/4"x10" Rectangular)
1. Using a fl at-head screwdriver, remove the
rectangular knock-out plate located on back of
hood.
2
2. Secure 7" round collar to top of hood using
(6) M4 x 8 screws.
2
1
2. Secure 3-1/4" x 10" rectangular collar to top of
hood using (6) M4 x 8 screws.
1
2
2. Secure 3-1/4" x 10" rectangular collar to back of
hood using (6) M4 x 8 screws.
10
www.zephyronline.com
1 6
5
3 4
4
3
5
6
4
5
6
3